Deity S-Mic 2 Shotgun Microphone
Click Image for Gallery
The S-MIC 2 Shotgun Microphone from Deity Microphones features a supercardioid polar pattern, a low-noise floor, and an all-brass body with a gold-coated PCB (printed circuit board). It can be used to capture audio for video and interview applications.
The PCB is sprayed and coated with a clear epoxy to perform without issues even in the most humid environments. This coating gives the microphone a water resistance level that allows it to work in the rain without being damaged. The microphone is powered with 24 or 48V phantom power and is equipped with a 3-pin XLR output connector.
Additionally, a foam windscreen, a microphone stand clip with a threaded 3/8" female mount, and a waterproof hardcase with custom cut-foam insert is included.
Deity Microphones S-MIC 2 Shotgun Microphone Inc:
- Deity S-MIC 2 Shotgun Microphone
- Foam Windscreen
- Mic Stand Clip with Threaded 3/8" Female Mount
- Waterproof Hardcase with Custom Cut Foam Insert
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Condenser |
| Polar Pattern | Supercardioid |
| Frequency Range | 50 Hz to 20 kHz |
| Equivalent Noise Level | 12 dB A-Weighted |
| Maximum SPL | 130 dB SPL Peak |
| THD | < 0.5% |
| Impedance | 75 Ohms |
| Load Impedance | 800 Ohms |
| Sensitivity | 32 dB at 1 kHz |
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Operating Voltage | 24 to 48 V |
| Operating Temperature | 14 to 158°F / -10.00 to 70.00°C |
| Length | 9.84" / 24.99 cm |
| Diameter | 0.75" / 19.05 mm |
| Weight | 0.44 lb / 200 g |